Canon 120MXS CMOS Image Sensors

Ultra-High Resolution and Speed

By incorporating close to the same number of pixels as photoreceptors in the human eye, the Canon 120MXS CMOS sensor delivers ultra-high 120 MP resolution in a compact design. At the same time, pixel-level innovations allow for faster readout speeds with lower noise ratios at 9.4fps – or higher when reducing the amount of readout lines. Uncover the finest details and find new clarity in industrial vision with the 120MXS CMOS Sensor from Canon. This 120-Megapixel CMOS sensor is available in monochrome (120MXSM), color (120MXSC), and with a specialized RGB-NIR color filter array (120MXSI).

Specialized RGB-NIR Pixel Filter Array

By replacing one of the green filters on a standard color CMOS sensor with a Near Infra-Red (NIR) filter, image processing from this sensor allows for the separation of visible and NIR spectrums. Discrete analysis of these bands from a single image simplifies dual sensor systems by reducing size, weight, and power (SWaP) requirements, provides added capabilities to systems that can benefit from the additional band, and enhances current solutions already detecting in both the NIR and visible wavelengths such as precision agriculture with the benefit of 120MP resolution.

New Pixel Structure Advances High-Resolution Imaging

The Canon 120MXS CMOS sensor shares a Floating Diffusion Node between four pixels instead of one, allowing for smaller readout circuitry and larger photodiodes which allows for increased sensitivity. Small 2.2µm pixels leverage a wire layer to prevent crosstalk, contributing to superior image quality, while progressive pixel reading of 28 digital output channels deftly handles the enormous amount of data from 122 million effective pixels.

Canon 120MXS CMOS Sensor Creates New Possibilities in a Number of Industries

For inspection, aeronautics, general manufacturing, documentation, life sciences and transportation, the Canon 120MXS CMOS sensor is ideal for:

  • 3D metrology
  • Aeronautic imaging
  • Digital archives
  • Document scanning
  • Flat panel display inspection
  • Intelligent traffic systems
  • Large area surveillance
  • Machine vision
  • Mapping
  • Medical imaging
  • Packaging and inspection
  • Reconnaissance
  • Scientific research
  • Security

Video

Technical Specifications

  120MXSC 120MXSI 120MXSM
Filter Type RGB RGB-NIR Monochrome
Sensitivity (e/lx/sec) 10,000 10,000 20,000
Resolution 122 megapixels
Effective Pixels 13272h x 9176v
Sensor Size APS-H (29.22mm x 20.20mm)
Pixel Size 2.2µm x 2.2µm
Maximum Frame Rate (All Pixels) 9.4 fps
Shutter Type Rolling
Dark Random Noise 2.3e rms @ gain x8, Room Temperature
Socket
  • 24-00661-188-284K-R27-L14 (thru-hole socket)
  • 24-00661-188-281K-R27-L14 (flat foot surface mount socket)
  • 24-00661-188-RB338K-R27-L14 (Rollerball® surface mount socket)
  • 24-00661-188-284K-R27-L14-HS1 (thru-hole Heatsink Socket™)

Andon Socket Specifications

Contact for More Information


120MXS Eval Kits120MP Dev Kit

The Canon 120MXS Evaluation Kit allows integrators and end-users to assess sensor performance and provides assets for image system designers to accelerate development time. The Evaluation Kit features a 120MXS 120MP CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA*.

Part Number Descriptions
3623V880 120MXSM Eval Kit - 120MP Mono sensor (no lens)
3623V881 120MXSC Eval Kit- 120MP Color sensor (no lens)
3623V882 120MXSI Eval Kit- 120MP RGB-NIR sensor (no lens)

The 120MXS Evaluation Kit includes:

  • Evaluation camera with pre-installed sensor (mono, RGB, or RGB-NIR )
  • Accessory package for out-of-the-box operation (quick start guide, power supply, compact tripod, cables)
  • Embedded software to setup the sensor, acquire image data, and communicate over USB 3.1 interface with any USB 3 compliant UI
  • PC-based UI application available for download to communicate with the camera
  • Sensor board design files source code*
  • VHDL code for the FPGA*

*Source code and VHDL code only available upon request with an NDA

Technical Specifications

Sensor Specs
Color Filter RGB RGB-NIR Monochrome
Sensitivity (e/lx/sec) 10,000 10,000 20,000
Resolution 122 megapixels
Effective Pixels 13272h x 9176v
Sensor Size APS-H (29.22mm x 20.20mm)
Pixel Size 2.2µm x 2.2µm
Maximum Frame Rate (All Pixels) 9.4 fps
Shutter Type Rolling
Dark Random Noise 2.3e rms @ gain x8, Room Temperature
Evaluation Kit Camera Specs
FPGA Intel Arria 10
FPGA Processor Dual-Core A9 ARM
Interface USB 3.1 Gen 1
AIA Vision Protocol
Programmable General Purpose I/O 4 External FPGA GPIO Pins
3 Opto-Isolated Input Pins
Use as trigger/exposure inputs
Bit Rate/Maximum Frame Rate 8-Bit: 2 fps
12-Bit: 1.3 fps
ISP Functions Region of Interest
Exposure Control
Framerate Control
Bad Pixel Replacement
Trigger Mode External
Debug / Registry  Setting Control Peek / Poke Commands
Lens Mount F-Mount
Power Input 12 VDC

 Order Online

For more information: