Article Source Macnica Engineer

AD-FMCLIDAR1-EBZ Accelerating LiDAR Development

What is LiDAR?

LiDAR stands for abbreviation of "Light Detection and Ranging." It is an optical sensor technology that measures the distance to an object by irradiating it with laser light and observing the reflected light.

 

As shown in the table below, there are various types of distance measurement sensors, and it is necessary to choose the most appropriate method according to the application. LiDAR is one of the most popular solutions for automated driving and AGVs. However, implementation requires complex know - how and technology.

 

This article introduces you to Analog Devices' prototyping platform for LiDAR applications, which reduces the barriers to LiDAR deployment and accelerates development.

Method
Benefits
Disadvantages
Optimal use
Vision (Camera)

Maximum resolution
Color information
Night
Bad weather
Range
Target Classification
Ultrasonic sonar

Regardless of weather
Low cost
Distance Range (Short)
Minimum resolution
Response speed
Slow target
Near Distance
Radar

Regardless of weather
Measurement range (maximum)
Velocity measurement and size estimation
Low resolution

Target detection
Target tracking
LiDAR

High resolution
Measuring range
Bad weather
Target color dependence
3D Mapping
Initial target classification
Obstacle detection

Comparison of distance measurement sensor systems

Platform "AD-FMCLIDAR1-EBZ" for LiDAR Developers

Analog Devices provides AD-FMCLIDAR1-EBZ as a platform for LiDAR developers.

 

By taking advantage of the company's proprietary high - speed AD technology, TIA (transimpedance amplifier), and APD (avalanche photodiode) interconnection know - how, LiDAR technology with improved noise floor and bandwidth can realize object detection with higher over longer distances.

 

AD-FMCLIDAR1-EBZ has the following three major characteristics.

  • Modular platform that is easy to customize for your applications
  • Excellent hardware performance for LiDAR development
  • Extensive software development support

Modular platform that is easy to customize for your needs

The development of LiDAR requires the optimization of the range, field of view, optical architecture, etc. according to the application.

 

The AD-FMCLIDAR1-EBZ consists of three boards : a laser board, an analog front - end board, and a data acquisition board. Each module can be customized according to individual needs.

 

During the evaluation, connect to the recommended FPGA board, such as Arria10 SoC.

 

The following describes the three boards that make up AD-FMCLIDAR1-EBZ.

Data acquisition substrate

A board with AD9094 (ADC) for high - speed data Lee Jung.

The FMC connector can be easily connected to the FPGA board, and the analog front board can be directly connected to the laser board.

Laser substrate

  • A laser emitting board with four lasers and an optimal driver and power supply.
  • It is mechanically connected to the analog front board and electrically connected to the data access Lee Jung board via a cable.
  • It is also possible to change the field of view of the laser.

Analog front end substrate

  • A substrate that senses the reflected laser, amplifies it, and transmits the signal to the data acquisition substrate.
  • 16 ch APD (avalanche photodiode) and 4 ch TIA (transimpedance amplifier) 
  • LTC6561 are installed.
  • You can customize optical components based on individual use cases.
image-2
AD-FMCLIDAR1-EBZ Configuration

Excellent hardware performance for LiDAR development

AD-FMCLIDAR1-EBZ has the hardware capabilities required for LiDAR development.

 

The main characteristics are :

  • 1D non - scan detector
  • Wavelength : 905 nm
  • Range : 1 ~ 10m (when light is not used) Can be extended to 60m or more when using light)
  • Horizontal resolution 16 pixels
  • FOV : laser FOV 15 (horizontal) x 30 (vertical)
  • Up to 1 GSPS data sampling on 4 channels
  • Complies with Class I laser safety standards
  • Standardized FMC high pin count (HPC) connectors can be plugged into selected FPGA boards
image-3
"AD-FMCLIDAR1-EBZ appearance"

Extensive software development support

image-4
AD-FMCLIDAR1-EBZ Configuration

LiDAR also requires a lot of resources for software development.

 

AD-FMCLIDAR1-EBZ provides support for a variety of software development efforts to help reduce development time, including :

 

  • A fully open source software framework that can be integrated with customer design
  • Licensable JESD204 interface framework
  • Matlab and Python wrappers
  • System control and data acquisition acquisition API for the detector
  • Support for Linux, Windows and Mac OS
  • Sample applications for MATLAB ®, Simulink ®, C/C + +, and Python
  • HDL reference design and driver to enable development in 0 days

 

Application Example

  • ADAS
  • Drone / UAV
  • Robots
  • Industrial automation
  • SLAM (simultaneous self - location map acquisition)

For more information: