Silic SoC - Arria 10 SoC Module Solution

Macnica Group introduced the mass production version of Silic SoC module in August 2018.

Product feature

This is a plug-and-play SoC module. Customer would focus on the development of application and custom logic only. Development input is reduced and development cycle is shortened. 

Standard Module Specifications

Main Device

  • Intel Arria 10 SoC, logical volumn: 270-660KLE
  • Dual core 1.5GHz ARM Cortex-A9

Memory

  • Processor side: 4GB DDR4 with ECC @40bit, 5pc
  • FPGA side: 8GB DDR4 with ECC @72bit,9pcs
  • 128MB SLC NAND Flash,128MB SPINOR Flash
  • I/O Interface
  • 24 pairs of High-speed transceivers, maximum rate: 14.2Gbps
  • LVDS – 12 pairs (10AS027), 48 pairs (10AS048)
  • FPGA GPIO – 60(10AS027), 101(10AS048)
  • Processor Peripherals: EMAC x1, USB (和SD/MMC共享) x1, I2Cx2, UARTx1, GPIOx1

Others

  • EEPROM – I2C, 512Kb, Temperature Sensor – I2C,Encryption – I2C, DS28C22Q, Watchdog -- MAX6746

Power Supply

  • 5V single supply
  • On board generated 3.3V,2.5V,1.8V(IO),1.2V(DDR4),1.0V(GXB), 0.9V (core voltage)

Mechanical structure

  • Size: 120mm x 74.2mm
  • 18 layers PCB
  • Connector: Samtec ST5 series, 160 pins, x2(10AS027)/x3(10AS048), support 20Gbps transmission rate

Software Support

  •  Quartus II reference project and Uboot
  •  Linux version: Linux-4.1.22-ltsi
  •  Default SMP mode, can support AMP mode
  •  File system: JFFS2 on NAND Flash

Silic SOC Module System Diagram:

Standard Module Purchasing Code and Parameter

Purchasing code: CYTSILIC-48H3E2-FF1JR

Parameter:
⦁    FPGA: 10AS048H3F34E2SG
⦁   24 pairs of XCVR high-speed transceivers: 14.2Gbps
⦁   Temperature range: 0°C ~ 100°C
⦁   FPGA speed grade: -2
⦁   HPS DDR4: 4GB with ECC
⦁   FPGA DDR4: 8GB with ECC
⦁   NAND: 128MB
⦁   QSPI Flash: 128MB

Application

Macnica Group could provide hardware and FPGA reference logic, Linux driver/ BSP development with the module. Also, provide customized module with the main chip or memory options.